Brockamp Instruction

• Instructions for closing a halter:

• Instructions for the easy-locking system:

The patented Easy-Locking system allows for length adjustment of a rope without metal connections.

Here, the rope runs through the fixed outer casing. The length adjustment (longer/shorter) is made by lightly holding the fixed outer casing and pulling the rope running through it to the left or right, or possibly up or down.

After adjusting to the desired length, smooth the fixed outer casing again and secure the rope.

• Instructions for the OneSize:

Fig. 1: The rope loop with the attached rope forms the nose of the One Size.

It is slipped over the muzzle and allows the halter size to be adjusted by sliding the outer casing up or down.

Fig. 2: The rear rope loop is placed over the horse's ears as a headpiece.

The size of the headpiece can be adjusted here by sliding the eyelet back and forth.

Fig. 3: Adjust the halter to the size of the horse's head.

Important!
To relieve constant pressure on the bridge of the nose, a knot should be tied at the bottom of the One Size.

In this case, the end of the knit is passed through the lower rope loop, then pulled through the newly formed loop and secured as a knot.